Application
UV curable Acrylate based material using dispensing or injection processes offers low outgassing, excellent Ultra-Violet (UV) stability and chemical resistance. Raysovec also offers good adhesion to metal and plastics.

Features
- Low temperature injection molding material
- Clean with very low outgas
- Hard but flexible material
- Highly compressible
- Excellent heat resistance
- Excellent chemical resistance
- Good adhesion to metal and plastics substrates

Mechanical properties
- Hardness: 50 Shore A
- Compression Set (80°C for 72hrs): 29%
- Tensile Strength: 6.5MPa / 950psi
- Elongation at Break: 120%
- Outgas by DHS: 2000 - 3000ng/g

Industries
Automotive, Aerospace, Data & Mobile Storage, Electronics, Semiconductor.

Application
UV curable Fluorocarbon based material using dispensing or injection processes offers low outgassing, excellent Ultra-Violet (UV) stability, heat and chemical resistance.

Features
Clean with very low outgas
Hard but flexible material
Excellent heat resistance
Excellent chemical resistance
Good adhesion to metal and plastics substrates
Incorporate fast UV-cure system
Fast & high production yield

Mechanical Properties
Hardness: 50 Shore A
Compression Set ( 80°C for 72 hrs) : 35%
Tensile Strength: 4.4 MPa / 641psi
Elongation at Break: 541%
Outgas by DHS: 2000 -3000ng/g

Industries
Automotive, Aerospace, Data & Mobile Storage, Electronics, Semiconductor.